Precautions In The Installation Of Projection Magnetic Compass
Feb 04, 2020| Projection magnetic compass is generally installed on the deck on the top of the bridge, suitable for all types of ships as a standard compass and steering compass. The role of the projected magnetic compass is to indicate the direction of navigation. The projection magnetic compass is used to display a part of the image of the compass dial. The adjustment tube can adjust the plane mirror up and down, and adjust the sharpness of the image according to the light, so that it can better appear in the sight of the helmsman. Lack of area and calibration difficulties. What should be paid attention to during the installation of the projection magnetic compass:
1. The plug of the distributor is a push-pull type, so when you pull out the plug, you cannot choose the rear part of the plug. You must pinch the groove in the middle of the plug and pull it one by one. When installing, pinch the back of the plug and push it up.
2. Please connect the power supply correctly. If the power supply is reversed, the fuse will blow out. If it blows, please open the distributor and replace the fuse on the circuit board.
3. When not in use, please turn off the power switch of the distributor.